After any following tests the part shall meet specifications without any degradation in appearance and performance except SPL. SPL shall not deviate more than -10 dB from the initial value
Ordinary Temperature Life Test The part shall be subjected to 96 hours at 25±10℃。 Input rated voltage resonant frequency, 1/2 duty Square wave. 2.2 High Temperature Test The part shall be capable of with standing a storage temperature of +70℃ for 48 hours. 2.3 Low Temperature Test The part shall be capable of with standing a storage temperature of -20 for ℃ 48 hours. 2.4 Humidity Test Temperature:+45℃±2℃ Relative Humidity:90%~95% Duration: 48 hours and expose to room temperature for 4 hours.
声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉
全部0条评论
快来发表一下你的评论吧 !