×

基于（英蓓特）STM32V100的串口程序

消耗积分:5 | 格式:rar | 大小:55 | 2008-08-02

84784

分享资料个

This example provides a description of how  to use the USART with hardware flow
control and communicate with the Hyperterminal.
First, the USART2 sends the TxBuffer to the hyperterminal and still waiting for
a string from the hyperterminal that you must enter which must end by '\r'
character (keypad ENTER button). Each byte received is retransmitted to the
Hyperterminal.
The string that you have entered is stored in the RxBuffer array. The receive
buffer have a RxBufferSize bytes as maximum.

The USART2 is configured as follow:
    - BaudRate = 115200 baud 
    - Word Length = 8 Bits
    - One Stop Bit
    - No parity
    - Hardware flow control enabled (RTS and CTS signals)
    - Receive and transmit enabled
    - USART Clock disabled
    - USART CPOL: Clock is active low
    - USART CPHA: Data is captured on the second edge
    - USART LastBit: The clock pulse of the last data bit is not output to
                     the SCLK pin

下载并关注上传者 低至0.43元/天 开通VIP 免费下载

声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉

评论(0)
发评论

下载排行榜

全部0条评论

快来发表一下你的评论吧 !