资料下载
×
互联系统中电流模式控制电源模块的大信号建模方法
消耗积分:3 |
格式:rar |
大小:234 |
2010-02-22
王平
分享资料个
本文提出一种互联系统中电流模式控制电源模块的大信号建模方法。提出了电流模式控制电路功率级的能量传输模型，并给出了四种基本变换器模型的推导；在仿真方法上，强调必须保留外环的反馈回路，才能保留大信号下系统的瞬态特性。所建模型有望在通过仿真预测、验证互联系统的稳定性方面获得应用。
Abstract: This paper proposes an approach (model) to deal with current-mode-controlled power modules while
investigating large-signal interactions among subsystems in a distributed dc power system. By establishing a family of power
stage models that embody nonlinearity to an algebraic operation block and keeping all components along in the external
feedback control loops staying in simulation, simulation speed can be dramatically accelerated as well as large-signal
dynamic properties can be reflected correctly. Mathematic derivation of the models is presented and simulation tests show the validity of the proposed approach.1
关键词﹕电源，仿真，分布式电源系统，相互作用2
Keywords: power supply, simulation, DPS, interaction
Abstract: This paper proposes an approach (model) to deal with current-mode-controlled power modules while
investigating large-signal interactions among subsystems in a distributed dc power system. By establishing a family of power
stage models that embody nonlinearity to an algebraic operation block and keeping all components along in the external
feedback control loops staying in simulation, simulation speed can be dramatically accelerated as well as large-signal
dynamic properties can be reflected correctly. Mathematic derivation of the models is presented and simulation tests show the validity of the proposed approach.1
关键词﹕电源，仿真，分布式电源系统，相互作用2
Keywords: power supply, simulation, DPS, interaction
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
评论(0)
发评论
- 相关下载
- 相关文章
