Cisco出版MPLS和VPN体系结构
多协议标签交换 (MPLS:Multi-Protocol Label Switching) 简介 多协议标签交换(MPLS)是一种用于快速数据包交换和路由的体系,它为网络数据流量...
Chapter 1. Multiprotocol Label Switching (MPLS) Architecture Overview
Scalability and Flexibility of IP-based Forwarding
Multiprotocol Label Switching (MPLS) Introduction
Other MPLS Applications
Summary
Chapter 2. Frame-mode MPLS Operation
Frame-mode MPLS Data Plane Operation
Label Bindings and Propagation in Frame-mode MPLS
Penultimate Hop Popping
MPLS Interaction with the Border Gateway Protocol
Summary
Chapter 3. Cell-mode MPLS Operation
Control-plane Connectivity Across an LC-ATM Interface
Labeled Packet Forwarding Across an ATM-LSR Domain
Label Allocation and Distribution Across an ATM-LSR Domain
Summary
Chapter 4. Running Frame-mode MPLS Across Switched WAN Media
Frame-mode MPLS Operation Across Frame Relay
Frame-mode MPLS Operation Across ATM PVCs
Summary
Chapter 5. Advanced MPLS Topics
Controlling the Distribution of Label Mappings
MPLS Encapsulation Across Ethernet Links
MPLS Loop Detection and Prevention
Traceroute Across an MPLS-enabled Network
Route Summarization Within an MPLS-enabled Network
Summary
Chapter 6. MPLS Migration and Configuration Case Study
Migration of the Backbone to a Frame-mode MPLS Solution
Pre-migration Infrastructure Checks
Addressing the Internal BGP Structure
Migration of Internal Links to MPLS
Removal of Unnecessary BGP Peering Sessions
Migration of an ATM-based Backbone to Frame-mode MPLS
Summary
声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉
全部0条评论
快来发表一下你的评论吧 !