1 Introduction
Thank you for purchasing a CC1190 Evaluation Module Kit.
The CC1190 is an integrated RF front-end comprising a Power Amplifier (PA) for increased RF output
power and a Low Noise Amplifier (LNA) for improved receive sensitivity. CC1190 is designed for
operation in the 850-950 MHz frequency band.
This Quick Start Guide will show you how to connect the CC1190EM to an existing system and how to
perform simple RX and TX tests using a signal generator and spectrum analyzer.
声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉
全部0条评论
快来发表一下你的评论吧 !