ULPI Hi-Speed Universal Serial Bus On-The-Go transceiver.
The ISP1504 is a Universal Serial Bus (USB) On-The-Go (OTG) transceiver that is fully
compliant with Universal Serial Bus Specification Rev. 2.0, On-The-Go Supplement to the
USB 2.0 Specification Rev. 1.3 and UTMI+ Low Pin Interface (ULPI) Specification
Rev. 1.1.
The ISP1504 can transmit and receive USB data at high-speed (480 Mbit/s), full-speed
(12 Mbit/s) and low-speed (1.5 Mbit/s), and provides a pin-optimized, physical layer
front-end attachment to USB host, peripheral and OTG devices.
声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉
全部0条评论
快来发表一下你的评论吧 !