资料下载
×
开源硬件-PMP9059.1-具有 BJT 开关的 120VAC 输入、5V/200mA 反激转换器 PCB layout 设计
消耗积分:10 |
格式:pdf |
大小:159.77KB |
2021-03-07
萧蔼晨
分享资料个
This reference design creates a 5V at 200mA from a 120VAC Input. This supply is to designed to fit into a very small volume with approximately 10mm total height. The UCC28720 primary side controller with a BJT power switch provides a low cost design. A TPS71433 is also used to provide an (...)
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
评论(0)
发评论
- 相关下载
- 相关文章
