资料下载
超宽带冲激无线电性能比较
分享资料个
介绍了超宽带冲激无线电跳时脉冲位置调制、跳时脉冲幅度调制和直接序列超宽带三种调制方式的信号模型，重点分析和比较了三种调制信号在加性高斯白噪声信道和单频干扰下的误码率特性，并对加性高斯白噪声信道中的误码率性能进行了计算机仿真。分析与仿真结果表明，在加性高斯白噪声信道中，跳时脉冲幅度调制和直接序列超宽带的误码率性能优于跳时脉冲位置调制；超宽带冲激无线电技术在信噪比条件下还具有较好的抗干扰性能。
关 键 词 超宽带无线电; 扩谱通信; 跳时; 单频干扰
Abstract This paper introduces time-hopping pulse-position-modulation, binary time-hopping pulse-amplitude-modulation and direct sequence ultra wideband first. Then we analyze the bit error rate performances of the three Ultra Wideband radio models in additive white Gaussian noise and in the presence of single-tone jamming and the results obtained are compared by theoretic analysis and computer simulation. The simulation results show that the Ultra Wideband radio is of good performance in low SNR indeed, and the bit error rate performances of binary time-hopping pulse-amplitude-modulation and direct sequence ultra wideband schemes are better than that of time-hopping pulse-position-modulation scheme.
Key words ultra wideband radio; spread-spectrum communications; time-hopping; single-tone jamming
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
- 相关下载
- 相关文章
