资料下载
×
用Intersil的三线DCP器件工作
消耗积分:0 |
格式:rar |
大小:111 |
2009-05-27
王越建
分享资料个
Intersil’s non-volatile 3-wire “Up/Down” interface DCPs recall the wiper position from internal EEPROM on power up. To change the wiper position and to store a new default wiper setting, they use INC, U/D, and CS pins. The INC and CS signals are also NORed together, internally, to generate an enable signal for the internal wiper decoder as shown in Figure 1. Casual treatment of the INC and CS control signals on power-up can lead to inadvertent store operations,“walking wipers” and other unexpected results.
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
评论(0)
发评论
- 相关下载
- 相关文章
