×

用REF102设计获得精确的-10V基准

消耗积分:5 | 格式:rar | 大小:30 | 2009-06-01

胡秋阳

分享资料个

The need for a precision –10.0V reference arises often. For
example, the best way to get a 0V to +10V output from a
CMOS MDAC is to use a –10V reference (see Figures 4-6).
ADI/PMI has the REF-08 –10V reference, but it has limited
performance. Although Burr-Brown offers no –10V reference,
the REF102 precision +10.0V reference can be accurately
converted to a precision –10.0V reference. The circuit
is simple and requires no precision components. The 2.5ppm/
°C temperature drift of the Burr-Brown REF102 is twenty
times better than the 50ppm/°C best grade of the PMI REF-
08. (Even our lowest grade is five times better.)

声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉

评论(0)
发评论

下载排行榜

全部0条评论

快来发表一下你的评论吧 !