资料下载
×
由输入缓冲器，放大器OPA2111和齐纳二极管组成的反馈电路
消耗积分:5 |
格式:rar |
大小:20 |
2009-06-06
分享资料个
A limiter circuit consisting of an input buffer (A1), an
output-scaling amplifier (A2), two zener diodes (Z1 and Z2),
and several other components can supply sharp, precise,
bipolar clamp levels with continuous variable control, from
0 to ±11V. See Figure 1. A feedback loop enclosing the
amplifiers and zeners generates the high clamping accuracy.
output-scaling amplifier (A2), two zener diodes (Z1 and Z2),
and several other components can supply sharp, precise,
bipolar clamp levels with continuous variable control, from
0 to ±11V. See Figure 1. A feedback loop enclosing the
amplifiers and zeners generates the high clamping accuracy.
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
评论(0)
发评论
- 相关下载
- 相关文章
