×

一种采用光波导的触觉传感器

消耗积分:3 | 格式:rar | 大小:254 | 2009-07-10

哈哈哈

分享资料个

给出了一种能敏感三向力、并能得到受力位置的光波导触觉传感器之工作原理和基本结构。这种传感器由光波导、橡胶垫、PSD、CCD 及信号处理电路组成, 通过图像处理可获得三向力, 采集PSD 的输出电流可得到受力位置。
关键词 光波导 触觉传感器 PSD
Abstract The imp lementat ion of a th ree2axis tact ile senso r is p resented. The senso r is comp rised of an op t ical waveguide, a rubber sheet, a PSD p late and a CCD camera. The th ree dimensional fo rce can be obtained th rough digital image p rocessing, and the cont ract po sit ion is calculated from the output current of PSD.
Key words Op t icalWaveguide Tact ile senso r PSD (Po sit ion Sensit ive Device)

声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉

评论(0)
发评论

下载排行榜

全部0条评论

快来发表一下你的评论吧 !