资料下载
×
压力机群控系统的设计
消耗积分:3 |
格式:rar |
大小:148 |
2009-07-30
贾飞世
分享资料个
文章详细介绍了压力机群控系统的实现，主要任务包括了上位机监控软件的开发、硬
件电路的设计和下位机的编程。系统上位机采用c++ Builder6.0 来进行监控程序的开
发，压力机群整个网络采用RS-485 的通信方式进行数据通信，控制板处理器选用集
成了A/D 和D/A 的高性能增强型MCU—aduc841,并充分的考虑了电磁干扰与可靠性
问题，同时下位机控制程序嵌入了嵌入式实时操作系统uC/OS-Ⅱ，以提高系统的实
时性与可靠性。
关键词：压力机、群控、实时操作系统、通信、aduc841
Abstract: This paper describe the realization of group control system for presses in detail,
including the development of monitoring software of host computer, the design of
hardware circuit and programming of the slave computer. The monitoring software is
programmed with c++ Builder6.0, the net of the system choose RS-485 communication
protocol; the control board select high-performance MCU—aduc841 which integrate
A/D&D/A and it is designed in the thinking of EMI and reliability fully, meanwhile in
order to improve the real-time and reliability of the system, the slave computer embed
the real time operating system uC/OS-Ⅱ.
Key words: presses、group control、Real-time OS、Communication、aduc841
件电路的设计和下位机的编程。系统上位机采用c++ Builder6.0 来进行监控程序的开
发，压力机群整个网络采用RS-485 的通信方式进行数据通信，控制板处理器选用集
成了A/D 和D/A 的高性能增强型MCU—aduc841,并充分的考虑了电磁干扰与可靠性
问题，同时下位机控制程序嵌入了嵌入式实时操作系统uC/OS-Ⅱ，以提高系统的实
时性与可靠性。
关键词：压力机、群控、实时操作系统、通信、aduc841
Abstract: This paper describe the realization of group control system for presses in detail,
including the development of monitoring software of host computer, the design of
hardware circuit and programming of the slave computer. The monitoring software is
programmed with c++ Builder6.0, the net of the system choose RS-485 communication
protocol; the control board select high-performance MCU—aduc841 which integrate
A/D&D/A and it is designed in the thinking of EMI and reliability fully, meanwhile in
order to improve the real-time and reliability of the system, the slave computer embed
the real time operating system uC/OS-Ⅱ.
Key words: presses、group control、Real-time OS、Communication、aduc841
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
评论(0)
发评论
- 相关下载
- 相关文章
