资料下载
×
AD746,pdf datasheet (Dual Prec
消耗积分:3 |
格式:rar |
大小:428 |
2009-08-29
张静
分享资料个
The power supply connections to the AD746 must maintain a
low impedance to ground over a bandwidth of 13 MHz or more.
This is especially important when driving a significant resistive
or capacitive load, since all current delivered to the load comes
from the power supplies. Multiple high quality bypass capacitors
are recommended for each power supply line in any critical
application. A 0.1 mF ceramic and a 1 mF tantalum capacitor as
shown in Figure 20 placed as close as possible to the amplifier
low impedance to ground over a bandwidth of 13 MHz or more.
This is especially important when driving a significant resistive
or capacitive load, since all current delivered to the load comes
from the power supplies. Multiple high quality bypass capacitors
are recommended for each power supply line in any critical
application. A 0.1 mF ceramic and a 1 mF tantalum capacitor as
shown in Figure 20 placed as close as possible to the amplifier
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
评论(0)
发评论
- 相关下载
- 相关文章
