资料下载
×
AD1853,pdf datasheet (192 kHz
消耗积分:2 |
格式:rar |
大小:574 |
2009-09-12
绝代双骄
分享资料个
The IDPM0 and IDPM1 control inputs are normally connected
HI or LO to establish the operating state of the AD1853.
They can be changed dynamically (and asynchronously to
LRCLK and the master clock), but it is possible that a click
or pop sound may result during the transition from one serial
mode to another. If possible, the AD1853 should be placed in
mute before such a change is made.
HI or LO to establish the operating state of the AD1853.
They can be changed dynamically (and asynchronously to
LRCLK and the master clock), but it is possible that a click
or pop sound may result during the transition from one serial
mode to another. If possible, the AD1853 should be placed in
mute before such a change is made.
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
评论(0)
发评论
- 相关下载
- 相关文章
