资料下载
×
AP1603,pdf,datasheet (Step-Up
消耗积分:3 |
格式:rar |
大小:433 |
2009-10-19
分享资料个
The AP1603 is a high efficiency step-up DC/DC
converter for applications using 1 to 2 NiMH battery
cells. Only three external components are required
to deliver a fixed output voltage of 3.3V. The
AP1603 starts up from less than 0.9V input with
1mA load. Pulse Frequency Modulation scheme
brings optimized performance for applications with
light output loading and low input voltages. The
output ripple and noise are lower compared with the
circuits operating in PSM mode.
The PFM control circuit operating in 150KHz (max.)
switching rate results in smaller passive
components. The space saving SOT23-6 packages
make the AP1603 an ideal choice of DC/DC
converter for space conscious applications, like
pagers, electronic cameras, and wireless microphones.
converter for applications using 1 to 2 NiMH battery
cells. Only three external components are required
to deliver a fixed output voltage of 3.3V. The
AP1603 starts up from less than 0.9V input with
1mA load. Pulse Frequency Modulation scheme
brings optimized performance for applications with
light output loading and low input voltages. The
output ripple and noise are lower compared with the
circuits operating in PSM mode.
The PFM control circuit operating in 150KHz (max.)
switching rate results in smaller passive
components. The space saving SOT23-6 packages
make the AP1603 an ideal choice of DC/DC
converter for space conscious applications, like
pagers, electronic cameras, and wireless microphones.
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
评论(0)
发评论
- 相关下载
- 相关文章
