×

高压隔离型/非隔离型电源参考设计

消耗积分:5 | 格式:rar | 大小:2048 | 2008-07-25

王刚

分享资料个

High Voltage Isolated/Non-Isolated
Power Supply Reference Designs

Simple, low cost, dual output flyback converter using a MAX50520 50% duty cycle current
mode controller.
Specification:
Vin = +19.2VVout1 = +9.05V ±10%, Vout2 = +9.05V ±10%
Iout = 10mA to 45mA / output
Pout = 832mW nominal
Frequency = 275kHz fixed.
Efficiency ≥60%
Output Ripple ≤50mV pp
Brown-out hold time = 1ms from 19.2V
Input protection = reverse polarity.
Output Dynamic = <300mV for 700mA current step.
Output short circuit protection = yes
Height = 5.1mm, 2.5mm.
Operating Temperature = 0°C to +70°C no cooling, still air.
Isolation = 1500V primary-secondary; 500V secondary-to-secondary.

声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉

评论(0)
发评论

下载排行榜

全部0条评论

快来发表一下你的评论吧 !