The A711 is a high voltage, low dropout current
regulator for high power LED, that the maximum output
current can be up to 1.1Amp. The output current was
decided by an external resistor. The output sink current
could be disabled via OE pin. PWM dimming function
could also be controlled by OE pin.
声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉
全部0条评论
快来发表一下你的评论吧 !