×

计算机与CPLD串口通信

消耗积分:5 | 格式:rar | 大小:444 | 2009-12-19

英雄孤寂

分享资料个

计算机与CPLD 串口通信
吴海明,童怀
(广东工业大学 信息工程学院, 广东 广州 510006)
摘要:通过计算机的鼠标、键盘操作与具有通用异步收发(UART)装置功能的复杂可编程逻辑器件(CPLD)通信,使复杂可编程逻辑器件控制数码管显示数字.即以复杂可编程逻辑器件为接口以实现计算机控制外围设备工作,并总结利用计算机来控制电机工作是可行的.
关键字:计算机;串口;通信;复杂可编程逻辑器件
Communication with serial port between computer & CPLD
Wu Hai-Ming, Tong Huai
(Institute of Information engineering, Guangdong University of Technology, Guangzhou, Guangdong, 510006, China) Abstract: Computer is communicated with Complicate Programmable Logic Device (CPLD) which is in possession of function of Universal Asynchronous Receive and Transmit (UART) by mouse and keyboard. Segment-LED that is some is on/off shows the number controlled by CPLD. It means CPLD is an interface in order to control the peripheral equipment through computer operation. Make a conclusion, motor which is controlled by computer using this method is feasible
Key words: computer; serial port; communication; CPLD

声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉

评论(0)
发评论

下载排行榜

全部0条评论

快来发表一下你的评论吧 !