Each of these data selectors/multiplexers contains inverters
and drivers to supply fully complementary, on-chip, binary
decoding data selection to the AND-OR-invert gates.
Separate strobe inputs are provided for each of the two
four-line sections.
Features
Y Permits multiplexing from N lines to 1 line
Y Performs parallel-to-serial conversion
Y Strobe (enable) line provided for cascading (N lines to
n lines)
Y High fan-out, low-impedance, totem-pole outputs
Y Typical average propagation delay times
From data 11 ns
From strobe 18 ns
From select 20 ns
Y Typical power dissipation 170 mW
Y Alternate Military/Aerospace device (54153) is available.
Contact a National Semiconductor Sales Office/
Distributor for specifications.
声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉
全部0条评论
快来发表一下你的评论吧 !