资料下载
×
Heart-Rate and EKG Monitor Usi
消耗积分:3 |
格式:rar |
大小:344 |
2010-03-03
分享资料个
This application report describes how to build a digital heart-rate monitor using a
MSP430FG439 microcontroller (MCU). The heartbeat rate per minute is displayed on
an LCD. In addition, the application outputs a digital data stream via an RS232 serial
port to allow EKG waveform display on a PC. PCB Gerber files, schematic, bill of
materials, and firmware are provided in a zip file associated with this application report.
The entire application runs using a CR2032 3-V lithium battery.
MSP430FG439 microcontroller (MCU). The heartbeat rate per minute is displayed on
an LCD. In addition, the application outputs a digital data stream via an RS232 serial
port to allow EKG waveform display on a PC. PCB Gerber files, schematic, bill of
materials, and firmware are provided in a zip file associated with this application report.
The entire application runs using a CR2032 3-V lithium battery.
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
评论(0)
发评论
- 相关下载
- 相关文章
