The self−oscillating circuit, commonly used in the low
cost half−bridge converter, is prone to thermal runaway
when the fluorescent lamp does not strike. As a
consequence, either the switches are oversized to sustain
such a fault condition, or the circuit includes a safety
network to avoid this risk. Although several schematics are
usable to perform such a function, the one described in this
paper is easy to implement and does not influence the normal
operation of the converter.
声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉
全部0条评论
快来发表一下你的评论吧 !