When performing PLL calibration it has been verified that waiting at least 100
μs after initiating the calibration is necessary to avoid an unreliable PLL
calibration result. Still, there exists a small, but finite probability that the
CC1070 PLL will not LOCK. Checking LOCK and recalibrating if LOCK is not
achieved is therefore necessary.
声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉
全部0条评论
快来发表一下你的评论吧 !