资料下载
×
Agilent E7400A Series EMC Anal
消耗积分:2 |
格式:rar |
大小:185 |
2010-07-12
王利祥
分享资料个
Specifications
All specifications apply over 0 °C to +55 °C unless other-
wise noted and are covered by the product warranty. The
analyzer will meet its specifications when: it’s within the
one year calibration cycle, AUTO ALIGN [ALL] is selected,
stored a minimum 2 hours within the operating tempera-
ture range, turned on for at least 5 minutes, and Align
Now RF has been run once every 24 hour period. Typical per-
formance describes the level at which 80% of the units will
meet or exceed with a 95% confidence level over 20 to 30 °C,
but is not covered in the product warranty. Characteristics
describe expected product performance levels that are not
covered in the product warranty.
All specifications apply over 0 °C to +55 °C unless other-
wise noted and are covered by the product warranty. The
analyzer will meet its specifications when: it’s within the
one year calibration cycle, AUTO ALIGN [ALL] is selected,
stored a minimum 2 hours within the operating tempera-
ture range, turned on for at least 5 minutes, and Align
Now RF has been run once every 24 hour period. Typical per-
formance describes the level at which 80% of the units will
meet or exceed with a 95% confidence level over 20 to 30 °C,
but is not covered in the product warranty. Characteristics
describe expected product performance levels that are not
covered in the product warranty.
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
评论(0)
发评论
- 相关下载
- 相关文章
