资料下载
×
M68000 pdf datasheet (Programm
消耗积分:5 |
格式:rar |
大小:2048 |
2009-02-09
分享资料个
The M68000 family programming model consists of two register groups: user and
supervisor. User programs executing in the user mode only use the registers in the user
group. System software executing in the supervisor mode can access all registers and uses
the control registers in the supervisor group to perform supervisor functions. The following
paragraphs provide a brief description of the registers in the user and supervisor models as
well as the data organization in the registers.
supervisor. User programs executing in the user mode only use the registers in the user
group. System software executing in the supervisor mode can access all registers and uses
the control registers in the supervisor group to perform supervisor functions. The following
paragraphs provide a brief description of the registers in the user and supervisor models as
well as the data organization in the registers.
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
评论(0)
发评论
- 相关下载
- 相关文章
