This application note describes the hardware and firmware methods used in Teridian single- and polyphase residential energy-metering SoCs that cope with sag and power-failure events. The sample code discussed in this application note was written for the 71M6531 demo code, but similar principles may be used with other Teridian energy-metering ICs.
声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉
全部0条评论
快来发表一下你的评论吧 !