资料下载
如何在S12X上配置及使用XGATE
liuxin
分享资料个
The HCS12X microcontroller family offers many enhancements over the
HCS12 family; principal among these is the XGate peripheral processor. The
XGATE is a programmable core that operates independently of the main CPU,
has access to all of the S12X peripherals, and features a RISC instruction set.
This application note describes how to configure and use the XGATE.
The document begins with a discussion of the issues surrounding data
coherency in dual core systems and how these can be addressed by software.
It goes on, in the following section, to provide some general information and
advice on how to set up and initialize the XGATE module.
Finally, it describes the XGATE’s various power saving modes, and provides a
comparison of their capabilities and differences.
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
- 相关下载
- 相关文章
