资料下载
×
通用串行总线(USB)电缆及连接器规格说明书
消耗积分:10 |
格式:rar |
大小:333 |
2009-04-11
分享资料个
通用串行总线电缆及连接器规格说明书
INTRODUCTION.
1.1 PURPOSE. This document describes the mechanical, electrical, environmental, design and
performance criteria and voluntary supplier compliance requirements for USB connectors,
cable and fabricated cable assemblies. In addition, this document provides detailed requirements
for the design, approval and implementation of application specific USB connectors
and fabricated cable assemblies.
1.2 SCOPE. The information provided in this document serves as a guideline for design, development
and voluntary compliance testing of USB connectors and fabricated cables assemblies,
as well as defining mechanical, electrical, environmental and performance characteristics.
As such, it defines how USB connectors, cable and fabricated cables assemblies are to
be implemented and how manufacturers and/or fabricators will interact with the voluntary
compliance requirements.
1.1 PURPOSE. This document describes the mechanical, electrical, environmental, design and
performance criteria and voluntary supplier compliance requirements for USB connectors,
cable and fabricated cable assemblies. In addition, this document provides detailed requirements
for the design, approval and implementation of application specific USB connectors
and fabricated cable assemblies.
1.2 SCOPE. The information provided in this document serves as a guideline for design, development
and voluntary compliance testing of USB connectors and fabricated cables assemblies,
as well as defining mechanical, electrical, environmental and performance characteristics.
As such, it defines how USB connectors, cable and fabricated cables assemblies are to
be implemented and how manufacturers and/or fabricators will interact with the voluntary
compliance requirements.
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
评论(0)
发评论
- 相关下载
- 相关文章
