Whether an LED is driven by a buck, boost, buck-boost or linear regulator, the common thread that links every drive circuit is the need to control the light output. A few applications are as simple as ON and OFF, but most need control in-between 0 and 100%.

声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉
全部0条评论
快来发表一下你的评论吧 !