资料下载
×
基于PC的水下作业控制系统的研究
消耗积分:3 |
格式:rar |
大小:149 |
2009-07-30
贾永世
分享资料个
本文研究设计了一种基于PC 机与单片机的水下作业控制系统。本控制系统采用的是PC 机与单片机串行通讯的方式，来实现对自动工具库的可视化控制。在对本计算机控制系统进行介绍时，首先介绍了整个下位机系统的硬件电路，包括电磁阀驱动电路、伺服阀驱动电路和串行通讯电路等。并且简介了串行通讯的相关内容。在此基础上介绍了其控制程序和上位机的控制软件的编制。
关键字: 水下作业；电路设计；PC
Abstract: A new control system based on PC and SoC underwater work system is designed in this paper. It iscusses the computer control system. The computer control system adopts PC and single-chip computer by serial ommunication (COM)，and realizes the motion of the toolkit. It is the main content of this paper. It discusses the ontrol software of PC and single-chip computer respectively. It indicates that by this control software, the auto oolkit can realize the motion in request and satisfy the request for exchange tools automatically.
Keywords: Underwater Work; Circuit Design; PC
关键字: 水下作业；电路设计；PC
Abstract: A new control system based on PC and SoC underwater work system is designed in this paper. It iscusses the computer control system. The computer control system adopts PC and single-chip computer by serial ommunication (COM)，and realizes the motion of the toolkit. It is the main content of this paper. It discusses the ontrol software of PC and single-chip computer respectively. It indicates that by this control software, the auto oolkit can realize the motion in request and satisfy the request for exchange tools automatically.
Keywords: Underwater Work; Circuit Design; PC
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
评论(0)
发评论
- 相关下载
- 相关文章
