×

基于VxWorks目标跟踪系统的接口板设计

消耗积分:3 | 格式:rar | 大小:122 | 2009-08-07

远不及你

分享资料个

根据坦克目标自动跟踪系统的总体技术要求,在基于VxWorks 嵌入式系统下,设计了坦克目标自动跟踪系统的I/O 板硬件电路;解决了坦克火控计算机与坦克火控系统之间
的通信问题;实现了本地总线与PCI 总线之间的数据交换。使系统具备了对单个机动目标的捕获和跟踪能力。
关键字:VxWorks、目标自动跟踪、I/O 板、PCI9054
Abstract: Based on the total technique request of the tank target auto-tracking system, this paper designs I/O board hardware circuit of the tank target auto-tracking system, and solves a
communicated problem between the tank fire control computer and the tank fire control system, and realizes data communication between the local bus and the PCI bus. It makes that the system has a capacity which seizures and tracks single automatic target.
Key Words:VxWorks;Target auto-tracking system;I/O board;PCI9054

声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉

评论(0)
发评论

下载排行榜

全部0条评论

快来发表一下你的评论吧 !