资料下载
钇稳定ZrO2 界限电流型微氧氧传感器的设计
贾桂林
分享资料个
钇稳定ZrO2 界限电流型微氧氧传感器的设计
从理论和实验角度对钇稳定ZrO2 界限电流型微氧氧传感器的量程与结构设计的关系进行了分析研究结果显示被测环境氧摩尔浓度应小于5% 被测环境氧浓度与氧传感器输出极限电流的数值基本成线性关系通过5000~50 000 ×10–6 500~20 000 ×10–6 100~10 000 ×10–6 50~1 000 ×10–6 四档测量范围的划分以及S / L比的合理设计可以实现钇稳定ZrO2 界限电流型微氧氧传感器对低氧浓度的准确测量.
The manufacture of the limiting current oxygen sensor of yttria-stabilized zirconia electrolyte in low oxygen concentration was studied from theory and experiment. The results of theory analyses show that the linearity for the saturated output current of oxygen sensor vs the measured oxygen concentration can be gotten below 5% oxygen concentration. By
dividing the oxygen concentration mole measure rang and designing ration of S/L, it can be realized to exact measure in low oxygen concentration using the limiting current oxygen sensor of yttria-stabilized zirconia electrolyte.
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
- 相关下载
- 相关文章
