×

三相电源过零信号检测及相序自适应的研究与实现

消耗积分:10 | 格式:rar | 大小:849 | 2010-12-20

王涛

分享资料个

为了实现对电机的同步控制, 提出了一种获取三相交流电的电压过零信号和电源相序自适应方法。该方法以P87C591单片机为核心，利用6N137光耦和P87C591单片机的捕获功能实现对电压过零点的检测；由软件实现对电源相序的判断和相序的自适应。这里对其硬件和软件给予了详细分析。实际应用表明，该方案经济、稳定、可靠。
Abstract:
 In order to implement the synchronous control of motor,a method for three-phase AC voltage zero-point inspecting and phase sequence self-adaptation is proposed in this paper.The micro-controller of P87C591 is the key part of the solution,the 6N137 and capture interrupt of P87C591 is adopted to detecting the zero-point of three-phase AC voltage.The phase sequence judgment and phase sequence self-adaptation is realized by the program operating in the controller.The software and hardware of the design method is shown. The test and real application results show that the method is economical, stable and reliable.
下载并关注上传者 低至0.43元/天 开通VIP 免费下载

声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉

评论(0)
发评论

下载排行榜

全部0条评论

快来发表一下你的评论吧 !