×

工控系统DCS操作站选择

消耗积分:5 | 格式:rar | 大小:322 | 2009-02-10

李伟

分享资料个

对工控系统中DCS操作站的选择进行研究,发现采用UNIX平台的DCS操作站在使用维护中存在缺点。对DCS操作站的使用现状进行了调查分析,并将采用UNIX平台的DCS操作站与采用Windows NT(2000)平台的DCS操作站进行了对比,发现采用WindowsNT(2000)平台的DCS操作站,能够解决系统安全性与稳定性方面的问题,并给出了具体的改进措施。实践证明:采用WindowsNT(2000)平台的DCS操作站具有成本低、开放性强的优势,是今后DCS操作站的发展方向。
关键词:操作站 操作系统 安全稳定
Abstract: Through researching the selection for DCS operator station in industrial control system, the disadvantages of DCS operator station
based on UNIX platform are found in operation and maintenance. After investigating and analyzing current status of use for DCS operator station,
two types of DCS operator stations based on UNIX and Windows NT(2000) were compared. It was found that the problems in security and
stability could be resolved by using DCS operator station based on Windows NT(2000),and concrete measures for improving were proposed.
The practice proves the DCS operator station based on Windows NT(2000) is provided with low costs and features strong open characteristic. It
is the developing trend of DCS operator station in future.
Keywords;O peratorst ation Operatings ystem Security Stability

声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉

评论(0)
发评论

下载排行榜

全部0条评论

快来发表一下你的评论吧 !