Quasi.square wave resonant converters also known as Quasi.Resonant (QR) converter are widely used in the adaptor
market. They allow designing flyback Switched.Mode Power Supply (SMPS) with reduced Electro.Magnetic Interference
(EMI) signature and improved efficiency. However, as the switching frequency of QR converter increases as the load decreases,
the frequency must be limited.
In traditional QR converter, the frequency is limited by a frequency clamp. But, when the switching frequency of the system
reaches the frequency clamp limit, valley jumping occurs: the controller hesitates between two valleys resulting in an unstable
operation and noise in the transformer at medium and light output loads.
声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉
全部0条评论
快来发表一下你的评论吧 !