×

基于FPGA的智能温度采集控制器

消耗积分:5 | 格式:rar | 大小:137 | 2009-05-27

申换换

分享资料个

温度的监测与控制,对于工业生产的发展有着非常重要的意义。分析并设计了基于数
字化一线总线技术的智能温度测控系统。本系统采用FPGA 实现一个温度采集控制器,用于传感器和上位机的连接,并采用微软公司的Visual C++作为开发平台,运用MSCOMM 控件进行串口通信,进行命令的发送和接收。
关键字:一线总线;异步通讯;FPGA;MSCOMM

An Intelligent Temperature Acquisition Controller Based on FPGA Mu Zhenhai 1, 2 (1 School of Information Engineering, University of Science and Technology Beijing, Beijing, 100083, China) (2 Department of Computer, Guilin College of Aerospace Technology, Guilin 541004, China) Abstract: Temperature is one of the most essential parameters in our life. The monitor and control of the temperature have phenomenal importance to the development of industries. This project aims at the design and analysis of a temperature acquisition and control system based on the digitalized one-wire technology.
Keywords: one-wire bus, asynchronous communication, FPGA, MSCOMM

声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉

评论(0)
发评论

下载排行榜

全部0条评论

快来发表一下你的评论吧 !