资料下载
×
介绍几种工作模式下HOTLink器件 CY7B933的 RD
消耗积分:3 |
格式:rar |
大小:125 |
2009-06-15
李静
分享资料个
This application note describes the behavior of the RDY
(Ready) pin in several modes of operation: Encoded, Bypass,
and BIST (Built-In Self-Test). The RDY pin indicates the status
of the HOTLinkä Receiver control logic and output pins. Its
function and timing are dependent on the state of the MODE,
BISTEN (Built-In Self-Test Enable), and RF (Reframe) pins.
The following sections describe RDY behavior in detail.
(Ready) pin in several modes of operation: Encoded, Bypass,
and BIST (Built-In Self-Test). The RDY pin indicates the status
of the HOTLinkä Receiver control logic and output pins. Its
function and timing are dependent on the state of the MODE,
BISTEN (Built-In Self-Test Enable), and RF (Reframe) pins.
The following sections describe RDY behavior in detail.
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
评论(0)
发评论
- 相关下载
- 相关文章
