资料下载
×
基于LabVIEW的圆锯片平面度检测系统
消耗积分:3 |
格式:rar |
大小:156 |
2009-06-18
张亮
分享资料个
介绍了圆锯片平面度检测系统的研究与开发。以电涡流传感器、数据采集卡、步进电
机、PC 机作为硬件配置，以LabVIEW 为开发平台，设计了圆锯片平面度检测系统。该系统可以高效地检测圆锯片平面度，适合于实际生产过程的质量控制。
关键词：LabVIEW；圆锯片；平面度；检测
Abstract：The measuring system for flat degree of circular saw was researched in this paper. The system made up of electric vortex sensor, DAQ board, stepper motor and PC was developed based on LabVIEW platform. It gives further improvement in measuring of flat degree of circular saw and is suitable for quality control of manufacture progress.
Key words：LabVIEW；Circular saw；Flat degree；Measuring
机、PC 机作为硬件配置，以LabVIEW 为开发平台，设计了圆锯片平面度检测系统。该系统可以高效地检测圆锯片平面度，适合于实际生产过程的质量控制。
关键词：LabVIEW；圆锯片；平面度；检测
Abstract：The measuring system for flat degree of circular saw was researched in this paper. The system made up of electric vortex sensor, DAQ board, stepper motor and PC was developed based on LabVIEW platform. It gives further improvement in measuring of flat degree of circular saw and is suitable for quality control of manufacture progress.
Key words：LabVIEW；Circular saw；Flat degree；Measuring
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
评论(0)
发评论
- 相关下载
- 相关文章
