资料下载
×
基于PMAC的某传动机构的传动间隙和效率的测控系统设计
消耗积分:5 |
格式:rar |
大小:182 |
2009-06-24
无人岛
分享资料个
本文介绍采用PMAC（可编程多轴控制卡）作为运动的控制卡，对某传动机构的传动间隙和效率的指标进行自动化测量。同时还阐述用PMAC同时对上述两个测试项进行实时运动控制的硬件系统设计和相应软件流程图。
关键词：可编程多轴控制器；传动间隙；传动效率；实时控制
Abstract:In this abstract, Used Programmable Multi-Axis Controller as controlling device for Transmission Clearance and Efficiency of a Driving Gear are measured automatically. Two measurement items of hardware system and soft flow chart which are real-time controlled based on PMAC are described.
Key words : Programmable Multi－Axis Controller ；Transmission Clearance ；Efficiency ；Real－time Controlled
关键词：可编程多轴控制器；传动间隙；传动效率；实时控制
Abstract:In this abstract, Used Programmable Multi-Axis Controller as controlling device for Transmission Clearance and Efficiency of a Driving Gear are measured automatically. Two measurement items of hardware system and soft flow chart which are real-time controlled based on PMAC are described.
Key words : Programmable Multi－Axis Controller ；Transmission Clearance ；Efficiency ；Real－time Controlled
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
评论(0)
发评论
- 相关下载
- 相关文章
