Transmission Lines and PCB Design – Part 1:Register now to attend the premier broadcast of this two-hour Webinar on the problems and
solutions associated with transmission lines when designing PCBs.
Transmission Lines and PCB Design – Part 1 is the first half of a detailed two-part Webinar that will provide you with a total of four hours of in-depth instruction on transmission lines and PCB design. So, while you are registering for Part 1, be sure to register for Part 2, which will be broadcast on August 17 at 10 am (PDT) 1 pm (EST).
声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉
全部0条评论
快来发表一下你的评论吧 !