×

Frequently Asked Questions N54

消耗积分:2 | 格式:rar | 大小:308 | 2010-08-01

分享资料个

Agilent’s FPGA dynamic probe provides greater
real-time measurement productivity for MSO-based
validation of FPGAs and the surrounding system.
The tool features:
• Increased visibility —Traditional probing limits
engineers to measuring signals at the periphery
of the FPGA. With Agilent’s FPGA dynamic
probe, engineers are able to measure up to 256
internal FPGA signals for each external FPGA pin
dedicated to debug.
• Faster probing changes — Agilent’s FPGA
dynamic probe enables your design team to move
probe points internal to the FPGA with a mouse
click — without any design changes and without
any changes to the timing of your design.
• Automatic setup of the MSO — The FPGA dynamic
probe maps internal signal names from your
FPGA design tool to the labels on your MSO
digital channels. The signal-naming capability of
the Agilent FPGA probe eliminates mistakes and
saves you the time it would take to manually set
up signal and bus names and MSO digital channel
connections, providing a significant advantage
over instruments without this capability.

声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉

评论(0)
发评论

下载排行榜

全部0条评论

快来发表一下你的评论吧 !