资料下载
×
Using Non-Contact AFM to Image
消耗积分:3 |
格式:rar |
大小:220 |
2010-08-02
微风挽雨
分享资料个
High resolution images of pat-
terned liquid surfaces have been
acquired without inducing either
capillary wetting (“bridging”) or
strong perturbations of the liquid
surface profile. Using a 5500 AFM
system with Mac Mode Controller
from Agilent Technologies in
dynamic force mode an oscillating
cantilever/tip ensemble is used to
probe the liquid surface. In order
to achieve high resolution stable
images on these patterned liquid
surfaces it is crucial that the oscil-
lating tip not contact the liquid
surface. [1] The liquid topogra-
phies were imaged in non-contact,
amplitude modulation AFM
(NCAM-AFM), a dynamic imaging
mode where the AFM cantilever is
vibrated with relatively small
terned liquid surfaces have been
acquired without inducing either
capillary wetting (“bridging”) or
strong perturbations of the liquid
surface profile. Using a 5500 AFM
system with Mac Mode Controller
from Agilent Technologies in
dynamic force mode an oscillating
cantilever/tip ensemble is used to
probe the liquid surface. In order
to achieve high resolution stable
images on these patterned liquid
surfaces it is crucial that the oscil-
lating tip not contact the liquid
surface. [1] The liquid topogra-
phies were imaged in non-contact,
amplitude modulation AFM
(NCAM-AFM), a dynamic imaging
mode where the AFM cantilever is
vibrated with relatively small
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
评论(0)
发评论
- 相关下载
- 相关文章
