资料下载
签名工作室工具箱
分享资料个
SigmaStudio Toolbox
Click here to return to the SigmaStudio and SigmaDSP Documentation top page.
The Toolbox contains the building blocks for constructing a system design. The available blocks will depend on the DSP processor(s) used in the project.
Click a category to access detailed algorithm information. In most cases you can also select an algorithm in SigmaStudio, then press F1, to directly access its Wiki page.
-
- Adaptive Mixer, Hilbert Transform
-
- Delay, DSP Functions, Arithmetic Operations, Gain Cells, Logic, Index Lookup Tables
-
- Single-Band Compressors, Multi-Band Compressors, Limiters
-
- FIR Filters, Adaptive FIR Filters, Second Order Filters, Parametric Filters, Crossover, Miscellaneous Filters
- Frequency Domain (ADAU145x, ADAU146x, ADSP-2158x, and ADSP-SC58x only)
- FFT, IFFT, Windows
-
- Pushbuttons, Volume Controls, Rotary Encoders, Debounce
-
- Input/Output from/to hardware: ASRC, SPDIF, GPIO, Serial Ports, Interface Write/Read
-
- Lookup Tables, Signal Detect, RMS Level Meter, Multi-Band Level Detector
- Master Control Port (ADAU145x and ADAU146x only)
- I2C Writes, I2C Reads, SPI Writes, SPI Reads, etc.
- Miscellaneous (ADSP-2158x and ADSP-SC58x only)
- PCM/PCMx Converters
- Multi Rate Processing (ADAU145x and ADAU146x only)
- Upsample, Downsample, Synchronous SRC
-
- State Machine, Demultiplexers, Multiplexers, Cross Fade
-
- Audio Signal Routers, Mixers, Splitters
-
- Assorted Clipping Algorithms (Soft, Hard, Asymmetric)
-
- Chimes, DC Sources, Sweeps, Switches, Voltage Controlled, Noise, WAV Player
-
- Gain Sliders, Mute, Envelopes
For tips on getting the most out of your design, see Building Schematics.
Resource Summary
The Resource Summary pages contain tables of many SigmaStudio algorithms and their required DSP memory resources.
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
- 相关下载
- 相关文章
