资料下载
×
隧道窑炉自校正控制装置的研究与实现
消耗积分:3 |
格式:rar |
大小:138 |
2009-05-27
王娟
分享资料个
本文的研究工作，是在大型耐火材料隧道窑炉上具体完成的。论述了本隧道窑系统实
现自校正控制的可能性，针对本系统对最小方差自校正和经典PID 控制进行了对比仿真研究，得出了在本控制系统上最小方差自校正控制确实优于经典PID 控制的结论。最后，在隧道窑炉上具体实现了最小方差自校正控制并取得了满意的控制效果。
关键词： 隧道窑炉；仿真；自校正装置；
=Study and Realization of the Self-tunning Control Methods in Tunnel Kiln
WANG YAN1 REN WEI2 (E-mail: w_wyan@163.com) (1.The Department Of Information Engineering, Tangshan Vocational Technical University Tangshan Hebei 063000;2. Tangshan Control Research Institute Of electrical equipment. Tangshan Hebei 063000. ) Abstract: The study job of this paper is completed in tunnel kiln of the fire-resistant material. In this paper we are discussed probability of to achieve the self-tunning control on this tunnel kiln control system. The control methods of the least-squares self-tunning and classics PID are simulated on this control system and given the conclusion that the least-squares self-tunning control method xcels the classics PID. Finally, the least-squares self-tunning control method is applied to the tunnel kiln control system and obtained the satisfy control effect.
Key words: Tunnel kiln ; Simulation; Self-tunning
现自校正控制的可能性，针对本系统对最小方差自校正和经典PID 控制进行了对比仿真研究，得出了在本控制系统上最小方差自校正控制确实优于经典PID 控制的结论。最后，在隧道窑炉上具体实现了最小方差自校正控制并取得了满意的控制效果。
关键词： 隧道窑炉；仿真；自校正装置；
=Study and Realization of the Self-tunning Control Methods in Tunnel Kiln
WANG YAN1 REN WEI2 (E-mail: w_wyan@163.com) (1.The Department Of Information Engineering, Tangshan Vocational Technical University Tangshan Hebei 063000;2. Tangshan Control Research Institute Of electrical equipment. Tangshan Hebei 063000. ) Abstract: The study job of this paper is completed in tunnel kiln of the fire-resistant material. In this paper we are discussed probability of to achieve the self-tunning control on this tunnel kiln control system. The control methods of the least-squares self-tunning and classics PID are simulated on this control system and given the conclusion that the least-squares self-tunning control method xcels the classics PID. Finally, the least-squares self-tunning control method is applied to the tunnel kiln control system and obtained the satisfy control effect.
Key words: Tunnel kiln ; Simulation; Self-tunning
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
评论(0)
发评论
- 相关下载
- 相关文章
