资料下载
×
基于CORBA的网络化制造控制系统实现方法研究
消耗积分:0 |
格式:rar |
大小:174 |
2009-06-22
王涛
分享资料个
提出了一种适合快速响应特点的支持网络化制造的控制系统的功能模型，为了满足开放性，可重构能力和系统配置的灵活性要求，系统地论述了使用多智能体系统模型简化系统结构的原理和实现方法，给出了基于 CORBA 规范的控制实验系统结构构成和功能划分，通过监控模块的实现证明了采用面向对象的编程技术和CORBA 规范实现支持网络制造化的控制系统的方法的可行性。
关键词：多智能体代理系统；CORBA；网络化制造
ABSTRACT: This paper proposes a methods of modeling Networked Manufacturing control system, which is capable of quick responses. To archive the opening reconfiguration and the scalability, the article systematically expounds the theories and the methods of using the Multi-Agent system model to simplify the system structure, tells the demo system structure and the function modules, proves the feasibility of realizing the Networked Manufacturing system with OOP methods in CORBA specification..
Key Words: Multi-Agent system CORBA Networked manufacturing Control system
关键词：多智能体代理系统；CORBA；网络化制造
ABSTRACT: This paper proposes a methods of modeling Networked Manufacturing control system, which is capable of quick responses. To archive the opening reconfiguration and the scalability, the article systematically expounds the theories and the methods of using the Multi-Agent system model to simplify the system structure, tells the demo system structure and the function modules, proves the feasibility of realizing the Networked Manufacturing system with OOP methods in CORBA specification..
Key Words: Multi-Agent system CORBA Networked manufacturing Control system
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
评论(0)
发评论
- 相关下载
- 相关文章
