资料下载
×
基于虚拟仪器的计算机控制实验系统
消耗积分:3 |
格式:rar |
大小:260 |
2009-07-09
凤毛麟角
分享资料个
本文介绍了计算机控制实验系统的开发及研究。在该系统硬件构成中，采用加热炉作
为控制对象，试验仪器，线路板，数据采集卡及PC 机，实现了对计算机控制技术的实践教学系统的硬件环境配置。实验系统软件采用虚拟仪器 (Virtual Instruments, VI)技术，开
发环境是美国国家仪器公司 (NationalInstruments，NI)推出的虚拟仪器应用软件开发平台
LabVIEW7.0。系统投入使用后取得良好的教学效果。
关键词: 虚拟仪器 PCL -818 LabVIEW
Abstract：In this paper the experiment System for The course of computer control are introduced. The experiment system is made up of control object, test instrument, connection board, date gather card and computer. The experiment system software based on LabVIEW7.0 and PCL -818L is devoleped. The new modularization system based on the platform of virtual instrument is established. A good teaching effect has been brought after the experiment system for the course of computer control had been applied.
Keywords： virtual instrument；PCL -818 ; LabVIEW
为控制对象，试验仪器，线路板，数据采集卡及PC 机，实现了对计算机控制技术的实践教学系统的硬件环境配置。实验系统软件采用虚拟仪器 (Virtual Instruments, VI)技术，开
发环境是美国国家仪器公司 (NationalInstruments，NI)推出的虚拟仪器应用软件开发平台
LabVIEW7.0。系统投入使用后取得良好的教学效果。
关键词: 虚拟仪器 PCL -818 LabVIEW
Abstract：In this paper the experiment System for The course of computer control are introduced. The experiment system is made up of control object, test instrument, connection board, date gather card and computer. The experiment system software based on LabVIEW7.0 and PCL -818L is devoleped. The new modularization system based on the platform of virtual instrument is established. A good teaching effect has been brought after the experiment system for the course of computer control had been applied.
Keywords： virtual instrument；PCL -818 ; LabVIEW
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
评论(1)
发评论
-
gdq20041202 2012-03-25
0 回复 举报谢谢！ 收起回复
- 相关下载
- 相关文章
