×

基于DSP的电子耳蜗语音编码及无线传输

消耗积分:3 | 格式:rar | 大小:477 | 2009-07-16

分享资料个

在电子耳蜗设计中,语音信号的实时有效编码及传输是其中的关键技术。本文根据耳
蜗的空间位置编码原理,设计了一套电子耳蜗语音处理软硬件系统,以数字信号处理器
(Digital signal processor, DSP)芯片为其硬件核心,实现了采集语音信号并采用连续交替取样(Continuous Interleaved Sampling, CIS)语音处理方案,并使用CVSD(Continuously VariableSlope Delta Modulation )编码压缩码率,并通过无线芯片nRF2401A 进行无线传输。初步实验结果表明:本文所设计的方案能够有效地将语音信号转变为电子耳蜗所需的信号,并进行有效的传送。
关键词:电子耳蜗;CIS 语音处理;CVSD 编码;DSP;无线传输
Abstract: In the design of the Cochlea Implant, the real-time speech processing and coding effectively is the pivotal technology. Due to the location coding principle, this paper proposed a flexible scheme of hardware and software on speech processing system for Cochlear Implant. In this design, DSPs as a hardware’s core has been used for speech signal acquisition, processing under CIS (Continuous Interleaved Sampling) principle, CVSD
coding (Continuously Variable Slope Delta Modulation), and then transmitted wireless via nRF2401A module. Preliminary experiments validated that the proposed system could effectively convert the speech to the signals required by Cochlear Implant with the wireless transmission scheme efficiently.
Keywords: Cochlea Implant; Speech Processing of CIS; CVSD coding; DSPs; wireless transmission

声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉

评论(0)
发评论

下载排行榜

全部0条评论

快来发表一下你的评论吧 !