×

基于集中式控制的轿车座椅和后视镜设计

消耗积分:0 | 格式:rar | 大小:138 | 2009-08-05

其实znvm

分享资料个

汽车后视镜是与汽车行驶安全相关的主要部件,良好的后视镜视野能保证驾驶员的行车
安全。本文研究开发了一种记忆存储式后视镜和座椅控制器。该控制器能电动调节后视镜上下转动、左右转动两个角度和座椅前后滑动、前椅面高度、后椅面高度和椅背角度四个位置或角度,能在调整后记忆存储位置信息,并且可以在需要时调用位置信息。本文在讨论了硬件电路的设计后对软件程序流程进行了介绍。
关键字:电子控制单元; 控制器; 汽车后视镜; 传感器
Abstract: Automobile rearview mirror is the main part which is related to the safely driving. This paper develops a memorial control unit for rearview mirror and chair. This control unit can electrical adjust the up-down and left-right angles of rearview mirror, it also can adjust the
forward-back, forward height, back height and chair back angle of driver’s chair. The control unit can memorize the positions of rearview mirror and chair after adjustment and we can renew the positions when we need. The software program flow was introduced after the hardware design.
Keywords: ECU; Controller; Automobile Rearview Mirror; Senor

预知更多有关后视镜精彩资料的请右戳:http://www.elecfans.com/zhuanti/houshijing.html

声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉

评论(0)
发评论

下载排行榜

全部0条评论

快来发表一下你的评论吧 !