资料下载
×
AN1156应用笔记,Tone, Balance, and
消耗积分:3 |
格式:rar |
大小:109 |
2010-03-05
vinww特烦恼
分享资料个
Fortunately, Intersil has solved this problem with the X9241
XDCPs. These devices can store the last position set by
control and automatically reload these values into the pot tap
registers upon power-up. Shown in the figure is the Intersil
X9241U quad 50KW XDCP used to control the treble, bass,
balance, and volume parameters of the LM1035 stereo
audio processor. Unlike a conventional DAC, the Intersil
devices can reload the last value, or a preset value, into the
tone/balance and volume registers upon power-up, so you
get predictable sound level conditions without any danger of
over-driving the power amplifier.
XDCPs. These devices can store the last position set by
control and automatically reload these values into the pot tap
registers upon power-up. Shown in the figure is the Intersil
X9241U quad 50KW XDCP used to control the treble, bass,
balance, and volume parameters of the LM1035 stereo
audio processor. Unlike a conventional DAC, the Intersil
devices can reload the last value, or a preset value, into the
tone/balance and volume registers upon power-up, so you
get predictable sound level conditions without any danger of
over-driving the power amplifier.
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
评论(0)
发评论
- 相关下载
- 相关文章
