资料下载
×
CalDigit eSATA Extender
消耗积分:3 |
格式:rar |
大小:2333 |
2010-04-08
贾伟刚
分享资料个
CalDigit eSATA Extender:A. Installing the CalDigit eSATA Extender
For Mac:
• Please remove the CalDigit VR and its accessories from the
box. Connect the power cord and FireWire cable or eSATA
cable.
• (For Mac Pro) If you are using the eSATA interface, and do
not have an eSATA adapter card installed in your Mac Pro.
Please connect the CalDigit eSATA extender (as shown
below and in the following steps) to the SATA port on the
logic board of your Mac Pro.
For Mac:
• Please remove the CalDigit VR and its accessories from the
box. Connect the power cord and FireWire cable or eSATA
cable.
• (For Mac Pro) If you are using the eSATA interface, and do
not have an eSATA adapter card installed in your Mac Pro.
Please connect the CalDigit eSATA extender (as shown
below and in the following steps) to the SATA port on the
logic board of your Mac Pro.
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
评论(0)
发评论
- 相关下载
- 相关文章
